Industri industri mit-ivy Advanced Acrylic Latex Sealing Primer kanthi kekuatan penetrasi sing apik banget
Aplikasi
Iki nduweni adhesi sing apik banget kanggo substrat baja lan primer adhedhasar banyu sing padha, lan sifat fisik lan mekanik sing apik sawise gelombang cet garing.
5. Film cat duwe pengawetan cahya lan pengawetan warna sawise garing.
Aplikasi sing disaranake Cocog kanggo nglindhungi trek truk, bagean mesin, peralatan industri ringan, lan liya-liyane sing dibutuhake perlindungan dhuwur.
Data teknis Werna macem-macem
Lumahing garing (50% miscibility) 15 ℃ C <1h ； 25'C <0,5h
Kering padhet (asor 50%) 15'C <48h; 25 ° C <24h
Hit "kg.cm" 50
Banyu (50 ± 5μm) Film cat 72 jam ora blister, ora mbantu tiba, ora teyeng.
Kekerasan 0,3 (pendulum dobel) kekandelan film uji coba mekanik (23 ± 3jμm)
Adhesion (Hegelian) Tataran 1
Perawatan lumahing Lumahing bahan sing dilapisi kudu ora ana asor, minyak, karbon asam lan awu.
Rincian Cepet
Baja kanthi kulit oksida: Blasting shot utawa metode blasting pasir kayata proses nganti level Sa2.5, ing endi blasting pasir ora bisa ditindakake kudu dipoles kanthi mekanis utawa
Diobati kanthi kimia kanggo mbusak kabeh pundhak sing rusak.
Baja tanpa kulit oksida: sandblasted (shotblasted) nganti Sa2.5 utawa alat gilingan listrik sing diaktifake kanthi udara menyang St3.
Pengelasan, pemotongan api utawa koreksi kembang api ing area lengkungan sing kobong: mecah nganti level St3.
Bahan dasar nganggo film cat lawas: copot partikel lan karat cat lawas sing longgar, lan pasir menyang St3 kanthi alat sanding udara utawa listrik.
Paket lukisan khas bisa digunakake nganggo primer adhedhasar banyu H902, utawa digunakake dhewe minangka topcoat dekorasi umum, utawa digunakake karo jinis produk primer liyane (kudu dicocogake kanggo verifikasi).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.
Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
| Vehicle Type | 100% Acrylic Latex | |
| COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
| Volume Solids | 31.8% | |
| Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
| Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
| Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
| Dries By | Evaporation, Coalescence | |
| Viscosity | 99 ± 2 KU | |
| Gloss / Sheen | Flat (5-10 @ 85°) |
| Shipping time by Sea (Just for reference) | ||||||||
|
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
| South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
| Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days | |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
